Bespoke infinity and overflow pools
Water flush with the edge, with no step down and no skimmers in sight. We explain what an overflow or infinity pool needs, when it makes sense and how we build it.
Water level flush with the edgeOverflow: water at ground level
The shell is built with its edge exactly at the water level. The water spills continuously into a perimeter channel with a grating, passes to the balance tank and comes back filtered. There are no skimmers in sight and no step between the coping and the water: the pool looks like a sheet of water set into the ground.
It is the usual choice on flat plots and for contemporary designs, because the channel blends into the paving.
Infinity: the edge that disappears
Here the overflow is normally concentrated on one side, the one facing the view: the water falls down a wall into a lower basin and the edge “vanishes” against the sea, the countryside or the sky. It needs a drop (real or built) on that side and careful flow calculations.
On Costa Blanca South it makes sense on plots with views or a slope; on a flat, enclosed plot a perimeter overflow looks better.

What an overflow pool needs
- Millimetre-level accuracy: if the edge is not perfectly level, the water spills on one side and not the other. It is structural work and finishing work at the same time.
- Overflow channel or wall: formed in the concrete shell itself and tiled in the same material.
- Balance tank: a tank, normally buried, sized for the pool volume and the swimmers.
- Filtration sized for it: the flow rate is higher than in a skimmer pool; pump, filter and pipes are calculated for it.
- Room on the plot: for the balance tank and the plant room.
When it makes sense, and when it does not
It makes sense if you want that look, you have room for the balance tank and you accept a somewhat higher budget and maintenance. We do not recommend it on very small plots, where the balance tank eats the garden, or when the budget is tight: there a well-built skimmer pool gives you more for the same money.
How we build it
Like all our pools: a gunite concrete shell, with the channel or the overflow wall formed in the same structure. The finish is critical: on the overflow edge the porcelain or mosaic is laid to a minimal tolerance. Then the balance tank, the pipework, the equipment and the final levelling.
Related projects
We are documenting our projects. Ask us on WhatsApp for photos of recent work.
Frequently asked questions
What is the difference between an overflow pool and an infinity pool?
In an overflow (deck-level) pool the water spills over the whole perimeter, or several sides, into a channel with a grating, and the surface sits at ground level. In an infinity (vanishing-edge) pool it normally spills over one side only, with no grating, into a lower basin, and the edge seems to disappear into the landscape. Both need a balance tank.
What is a balance tank?
A tank that collects the water that spills over and returns it to the main pool through the filtration. Practically every overflow pool needs one. Its size depends on the pool volume and the number of swimmers, and it needs room on the plot.
How much more does it cost than a skimmer pool?
Considerably more: there is more building work (overflow channel or wall, balance tank), more installation and more precision in the levelling. At the site visit we tell you whether your plot allows it and what the difference in cost would be.
Can a skimmer pool be converted into an overflow pool?
Sometimes, if there is room for the balance tank and the existing shell is in good condition. It is a major renovation; we study it case by case.
Shall we talk about your pool?
Tell us what you would like to build or renovate and where the property is. We will tell you whether we can help and what the next steps would be.